Buy metals: Bright, anodised or with high-quality powder coating!
Go to homepage
€0.00*

Aluminum solar profile 40x40 mm || Groove M8/M10 || up to 7,000 mm

Daily shipping
Secure shopping
Quality guarantee
Aluminum solar profile 40x40 mm || Groove M8/M10 || up to 7,000 mm
Aluminum solar profile 40x40 mm || Groove M8/M10 || up to 7,000 mm
Aluminum solar profile 40x40 mm || Groove M8/M10 || up to 7,000 mm
Aluminum solar profile 40x40 mm || Groove M8/M10 || up to 7,000 mm
Aluminum solar profile 40x40 mm || Groove M8/M10 || up to 7,000 mm
Aluminum solar profile 40x40 mm || Groove M8/M10 || up to 7,000 mm
Aluminum solar profile 40x40 mm || Groove M8/M10 || up to 7,000 mm
Aluminum solar profile 40x40 mm || Groove M8/M10 || up to 7,000 mm
Alloy
This article can be manufactured individually according to your specifications.
Please enter your desired dimensions and data:
Dimensions and cutting
mm
Bitte beachten Sie, dass bei individuellen Wunschmaßen kein Rückgaberecht besteht!
Weitere Informationen finden Sie in unserer Widerrufsbelehrung.
Length:
Preistipp
Preistipp
Preistipp
Preistipp
Preistipp
Preistipp
Preistipp
Preistipp
Preistipp
Preistipp
Preistipp
Preistipp
Preistipp
Tip: Standard sizes are generally cheaper than individual cuts!
The respective base price is displayed below the total price.
Cutting type/angle:
Cutting costs per piece:
The higher the number of pieces, the lower the cutting costs per piece.
Length tolerance:
The dimensions of the delivered item may vary by the specified values. The tolerances are due to the production process and are not a reason for complaint. If you require more precise dimensions, please contact us.
The dimensions of the delivered item may vary by the specified values.
The tolerances are due to the production process and are not a reason for complaint.
For more precise dimensions, please use the “Customized/desired length” option.
Powder coating
You can have this item individually powder-coated according to your wishes.
Powder coating:
Instructions for powder coating:
The powder coating is all-round.
Please note that there are approx. 5 mm holes at the ends. These are used for fastening during powder coating and are unmachined and not deburred. Nevertheless, we always endeavor to manufacture these without holes or only with holes on one side. For this purpose, we recommend a measurement of approx. 50 - 80 mm if necessary.
Furthermore, there is no right of return for these custom-made products.
Primer:
There is a one-off surcharge of €71,40* for the primer, which is shown separately in the shopping cart.
Shade:
Standardfarben
Weitere Sonderfarben (Aufpreispflichtig!)
RAL-Sonderfarben (Aufpreispflichtig!)
Please note that the color representation may vary depending on the monitor and is therefore for guidance only! The unit price changes depending on the color selected. This is displayed in the configuration.
For the currently selected special color there is a one-time surcharge of 71,40€*, which is shown separately in the shopping cart.

Gloss level/surface:
Drill holes
Piece (per
Hinweis zur Bohrungsauswahl bei Hohlprofilen:
Bitte beachten Sie, dass Durchgangsbohrungen bei Hohlprofilen als zwei einzelne Bohrungen gezählt werden.
Hole diameter:
Sketch/drawing for drill holes:
Deburring
Deburr article after cutting:
Summary of your configuration:
JTL Bestellposition Menge:
JTL Bestellposition Preis Divisor:
Anzahl:
Aktueller Rabatt in %:
Mehr bestellen – mehr sparen!
Grundpreis vor Rabatt:
Dimension:
Tolerance:
Deburring:
Drill holes:
Powder coating:
Theor. weight (per piece):
Theor. weight (total):
Order more - save more!

€9.04 *

on the base price
* / m
Base price: €9.04* / m

Prices incl. VAT plus shipping costs

Available, delivery time: -

Product number: LM-17579-002

Product information

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Upload in progress, please be patient ...