Aluminium Round Bar 6 mm
Daily shipping
Secure shopping
Quality guarantee
Product information
The aluminium round bar made of EN AW-6060 (AlMgSi0.5) is supplied in a press blank / raw condition. The profile is extruded and delivered in temper T66 (solution heat-treated and artificially aged).
Technical features:
- Material: AlMgSi0.5
- Alloy designation: EN AW-6060
- Surface: press blank / raw
- Temper: T66 (solution heat-treated and artificially aged)
- Manufacturing process: extruded
- Standards: EN 573-3, EN 755-1 / -2 / -3
Material properties:
- low density
- very good anodising properties
- very good corrosion resistance
- smooth surface
- tight dimensional tolerances
- good machinability
- non-magnetic
- very suitable for decorative anodising
- weldable and solderable
- suitable for food-contact applications according to EN 602
Notice: The sawn edges are not deburred. Due to the raw aluminium surface, minor scratches or surface marks may occur. These are standard for this product type and do not constitute a defect.
Surface appearance and colour may vary depending on production batch and display settings.
| longueurs tolerance: | +-5 mm (precise possible -> please inquire) |
|---|---|
| manufacturing process: | Cast, homogenized, and turned: Ø >= 301 mm, drawn: Ø , pressed: Ø >= 16 mm to Ø 300 mm |
| Others: | Note: Due to production processes, a chamfer of up to approx. 5 mm may occur at one end of the bar., The sawn edges are unfinished and not deburred. |
| material: | AlMgSi0,5, EN AW-2007, AlCu4PbMgMn (AlCuMgPb) |
| material number: | EN AW-2007 = 3.1645, EN AW-6060 = 3.3206 |
| molds: | round bar |
| delivery condition: | F 0 = Ø >= 301 mm, T4 = Ø >= 16 mm bis Ø 300 mm, T66 |
| surface: | mill finish (raw/unfinished), unprocessed, raw, scratches, storage marks, etc. normal |
| Standard norm: | Chemical composition according to EN 573-3, General requirements according to EN 755-1, Propriétés mécaniques selon EN 755-2, Tolérances dimensionnelles et géométriques selon EN 754-6, Tolérances dimensionnelles et géométriques selon EN 755-3 |
Login
No reviews found. Share your insights with others.