FAQ: Custom bent parts and sheet metal bends
What is the difference between a sheet metal cut and a bent part?
A sheet metal cut is a flat workpiece cut to the required external dimensions. One or more bends turn it into a three-dimensional bent part, such as an L-, U-, Z- or hat profile.
Can I order custom bent parts online?
Yes. Select the appropriate bent-part category and enter the dimensions, angles, material options and quantity available for the product. The price and available specification are displayed based on your configuration.
Which bent profile is suitable for an angle, an enclosure or an offset?
An L-profile is often suitable for a right-angled finish. A U-profile can be used for a three-sided enclosure, while a Z-profile is suitable for offset levels. The final choice depends on the installation situation, dimensions and load.
What can I do if no standard profile fits?
Check the individually configurable bent profile. The leg lengths, angles and other dimensions offered for the product can be specified there. Further requirements need to be clarified technically.
What dimensions do I need for a sheet metal bend?
Depending on the profile shape, you will need the component length, individual leg lengths, angles, material, material thickness and quantity. For critical fits, the dimension reference, bend radius and manufacturing tolerances must also be taken into account.
Should I enter internal or external dimensions for a bent part?
This depends on the product. The applicable dimension definition, product drawing and input instructions for the selected bent part are authoritative. Internal dimensions, external dimensions and the flat pattern must not be confused.
Which materials are available for bent parts?
Depending on the product, you can choose from aluminium, stainless steel, steel, galvanised steel, Corten steel, brass and copper. Availability depends on the profile shape, material thickness, dimensions and finish.
What sheet thicknesses can be bent?
The possible sheet thicknesses depend on the material, profile shape, leg length and selected product. The values available in the relevant product configurator are definitive.
Which bent parts are suitable for outdoor use?
Suitable aluminium or stainless steel options are often used outdoors. Depending on the construction, coated steel or Corten steel may also be suitable. The material grade, finish, contact corrosion and water drainage must be appropriate for the environment.
Can bent parts be powder-coated?
Many bent parts made of steel, stainless steel and aluminium can be powder-coated. Available colours and finish options are shown for each product. This option is not available for brass and copper.
Which bent parts are available for roofs, façades and water drainage?
The range includes, among other things, window sills and drip flashings, wall copings and parapet flashings, eaves flashings, gable flashings, wall connection flashings, internal corner flashings, snow guard wedges, box gutters and roof gutters. Their technical suitability must be checked for the specific building project.
What determines the price of a bent part?
The price depends, among other things, on the profile shape, material, material thickness, component length, leg lengths, number of bends, finish and quantity. The price displayed after configuring the product is authoritative.
Can I order individual parts, small batches or recurring quantities?
Yes. METALXACT is suitable for individual parts, project quantities, small batches and recurring B2B orders. Enter the required quantity on the product page; any available volume pricing is shown there.
