Product number: LMX-BKO-023

Verge flashing | gable edge flashing – custom made steel raw / untreated 1 mm

Material

Aluminium

Steel

Stainless steel

Cortenstahl (wetterfest)

Messing

Kupfer

Material thickness

Surface

roh / unbehandelt

galvanised

Cutting & Machining

Production note: We check every custom bend before production. Not every combination of dimensions and angles is technically feasible. If your configuration cannot be manufactured as specified, we will contact you after you have placed your order.

leg A:

15 – 1200 mm

Angle ° A-B:

-175 – 175 °

leg B:

15 – 1200 mm

Angle ° B-C:

-175 – 175 °

leg C:

15 – 1200 mm

Angle ° C-D:

-175 – 175 °

leg D:

15 – 1200 mm

Angle ° D-E:

-175 – 175 °

leg E:

15 – 1200 mm

Angle ° E-F:

-175 – 175 °

leg F:

15 – 1200 mm

Angle ° F-G:

-175 – 175 °

leg G:

15 – 1200 mm

Angle ° G-H:

-175 – 175 °

leg H:

15 – 1200 mm

Angle ° H-I:

-175 – 175 °

leg I:

15 – 1200 mm

Angle ° I-J:

-175 – 175 °

leg J:

15 – 1200 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 400 mm

Angle ° A-B:

89 – 150 °

leg B:

15 – 400 mm

Angle ° B-C:

89 – 150 °

leg C:

15 – 400 mm

Trennlinie:

leg D:

15 – 400 mm

Angle ° B-D:

89 – 150 °

leg E:

15 – 400 mm

Angle ° B-E:

89 – 150 °

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 500 mm

Angle ° A-B:

45 – 175 °

leg B:

50 – 1200 mm

Angle ° B-C:

-175 – -45 °

leg C:

25 – 750 mm

Angle ° C-D:

-175 – -45 °

leg D:

13 – 500 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 500 mm

Angle ° A-B:

45 – 175 °

leg B:

20 – 1000 mm

Angle ° B-C:

45 – 175 °

leg C:

20 – 1400 mm

Angle ° C-D:

45 – 175 °

leg D:

15 – 1000 mm

Angle ° D-E:

45 – 175 °

leg E:

15 – 500 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 500 mm

Angle ° A-B:

-175 – -45 °

leg B:

20 – 500 mm

Angle ° B-C:

45 – 175 °

leg C:

20 – 1250 mm

Angle ° C-D:

45 – 175 °

leg D:

15 – 500 mm

Angle ° D-E:

-175 – -45 °

leg E:

20 – 500 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 1250 mm

Angle ° A-B:

45 – 175 °

leg B:

15 – 1250 mm

Angle ° B-C:

45 – 175 °

leg C:

15 – 1250 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 1250 mm

Angle ° A-B:

-175 – -45 °

leg B:

15 – 1250 mm

Angle ° B-C:

45 – 175 °

leg C:

15 – 1250 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 500 mm

Angle ° A-B:

-175 – -45 °

leg B:

20 – 1200 mm

Angle ° B-C:

45 – 175 °

leg C:

20 – 1200 mm

Angle ° C-D:

-175 – -45 °

leg D:

20 – 500 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 1200 mm

Angle ° A-B:

45 – 175 °

leg B:

50 – 750 mm

Angle ° B-C:

45 – 175 °

leg C:

20 – 750 mm

Angle ° C-D:

45 – 175 °

leg D:

20 – 500 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 1200 mm

Angle ° A-B:

45 – 175 °

leg B:

15 – 1200 mm

Angle ° B-C:

-175 – -45 °

leg C:

20 – 1200 mm

Angle ° C-D:

15 – 175 °

leg D:

15 – 1200 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 50 mm

Angle ° A-B:

45 – 175 °

leg B:

20 – 200 mm

Angle ° B-C:

45 – 175 °

leg C:

20 – 200 mm

Angle ° C-D:

45 – 175 °

leg D:

15 – 200 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

20 – 750 mm

Angle ° A-B:

45 – 175 °

leg B:

20 – 750 mm

Angle ° B-C:

45 – 175 °

leg C:

20 – 750 mm

Angle ° C-D:

45 – 175 °

leg D:

20 – 750 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 1400 mm

Angle ° A-B:

45 – 175 °

leg B:

15 – 1400 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 750 mm

Angle ° A-B:

90 – 175 °

leg B:

20 – 1400 mm

Angle ° B-C:

90 – 175 °

leg C:

15 – 750 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Cutting & Machining

leg A:

15 – 750 mm

Angle ° A-B:

45 – 175 °

leg B:

20 – 1400 mm

Angle ° B-C:

-175 – -45 °

leg C:

15 – 750 mm

Trennlinie:

Dimensions refer to:

outside

inside

exposed side:

Outside

Inside

Length & Processing

Area selection:

%product.customFields.form%

Developed width:

Length:

Please note that custom-made items are excluded from return. Further information can be found in our cancellation policy.

Trennlinie:

Deburring:

Deburr cut edges? + %calculations.entgratung% €

Unit production cost:

Cutting tolerance:

For more precise dimensions please select “custom cut”.

Summary

Menge:

Blank size:

Tolerance:

Theoretical weight (per piece):

Theoretical weight (total):

Bending:

Deburring:

Powder coating:

Theoretical weight (per piece):

base_price_discount_percent:

base_price_without_discount:

Order more - save more!

€39.55 *

Base price: €39.55* / qm

* / qm

Available, delivery time: -

Product information

Verges flashing made to measure

You configure your verge flashing individually and we manufacture and deliver the component precisely to size. In the configurator you select the material – aluminium, stainless steel, steel, galvanized steel, copper or brass – as well as the desired surface. In addition to smooth sheets, structured options such as checker plate, perforated sheet or teardrop plate are available.

Verge flashings are installed as a side edge finish of the roof and protect the roof structure at the gable ends from wind, rain and lateral weather exposure. Their shape provides a clean edge and controlled water run-off.

Angle tolerance: +-1°
Leg length tolerance: +-0.3 mm
Length tolerance: +-3 mm

The sawn edges are unfinished, sharp and not deburred.

The surface is protected on one side only by a protective film. On the unprotected side, scratches caused by transport or handling cannot be completely ruled out. This corresponds to standard commercial quality and does not constitute a reason for complaint.

Ordering notes

Bending creates material- and thickness-dependent radii on the inside and outside.
The verge flashing geometry is designed for lateral roof edge protection.
Minor tool marks may occur due to production.

Application & use

Verge flashings are used to finish the side edges of roofs and protect the roof construction from weather ingress. They prevent wind and moisture from penetrating beneath the roof covering.

Depending on material and surface, verge flashings are suitable for residential, commercial and public buildings. Installation is carried out by screwing or integration into the roofing system.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.