Product information
Aluminium Sheet Coil-Anodised E6/C0 (EV1) – EN AW-5005 (AlMg1(B)) according to EN 573 / EN 485
This anodised aluminium sheet is a rolled product made from EN AW-5005 (AlMg1(B)) with a decorative E6/C0 (EV1) anodised surface. The material offers very good resistance to atmospheric corrosion and seawater as well as good cold formability and weldability. The anodised layer has a thickness of approx. 10 µm.
Technical Specifications
- Material: AlMg1(B)
- Material designation: EN AW-5005
- Surface: coil-anodised E6/C0 (EV1)
- Anodised layer: approx. 10 µm
- Temper: H14/24
- Manufacturing process: rolled
- Standards: EN 573-3 / EN 485-1/-2/-4
- Surface protection: protective film applied to one side
Surface Description
Special measures are taken during the production of this anodising quality to achieve the most homogeneous and decorative surface appearance possible. This finish is particularly suitable for applications where, in addition to the technical properties of aluminium, a uniform and high-quality appearance is required.
The protective film applied to one side is intended to protect the anodised visible surface from damage during storage, processing and transport.
Material Properties
- very good resistance to atmospheric corrosion
- very good corrosion resistance to seawater
- good cold formability
- good weldability
- low weight
- suitable for decorative applications
- uniform and high-quality anodised surface
- versatile for indoor and outdoor applications
Information on Surface and Processing
Despite the anodising quality intended for decorative applications, minor surface characteristics may occur due to the manufacturing process and material properties. The protective film reduces the risk of damage during storage, processing and transport, but does not provide complete protection against mechanical impact.
Cut edges are not anodised after cutting and may be unfinished and/or not deburred.
Minor variations in colour, gloss level and surface appearance may occur between different production batches of anodised aluminium. If several sheets are to be installed directly next to each other and a highly uniform appearance is required, this should be taken into account when placing the order.
In addition, the appearance of the surface in product images may differ from the actual colour due to different monitor, display and graphics settings.
Applications
- façade and cladding elements
- decorative indoor and outdoor applications
- metalwork and equipment construction
- covers and panels
- furniture and interior construction
- shopfitting and exhibition construction
- technical constructions with high visual requirements
Tolerances
Dimensional, shape and thickness tolerances are governed by the applicable standards of EN 485. Manufacturing-related deviations within the permissible standard tolerances may occur.
Login