Square Stainless Steel Glass Clamp Flat / Straight WITH Safety Plate V4A Stainless Steel
| Quantity | Unit price | |
|---|---|---|
| From 1 |
€10.27*
|
|
| From 50 |
€10.11*
|
-2% |
| From 100 |
€9.84*
|
-4% |
| From 251 |
€9.57*
|
-7% |
| From 501 |
€9.31*
|
-9% |
€10.27*
Available, delivery time: 1-3 working days
Glashalterzubehör
passende Vierkantrohre
Product information
Square stainless steel glass clamp 52 × 52 mm
This high-quality square stainless steel glass clamp is designed for secure fixing of glass panels to railings with round tubes Ø 48.3 mm. This version is supplied without rubber inserts and can be adapted to the required glass thickness using separately available inserts. The removable safety plate can be used on either the right or left side; a removable safety pin is also included. The result is a stable and visually appealing glass fixing.
The glass clamp is made of V2A stainless steel. V2A is robust, easy to maintain and suitable for typical indoor applications and normally exposed outdoor areas.
Properties
- Dimensions: 52 × 52 mm
- Mounting: round tube Ø 48.3 mm
- Glass thickness: freely selectable; suitable rubber inserts available separately
- Rubber inserts: not included
- Safety plate: included
- Safety pin: included
- Material: V2A stainless steel
Applications
- Glass railings and balustrades
- Balcony and terrace railings
- Stair railings
- Glass privacy screens and partition elements
Scope of delivery
- 1 × stainless steel glass clamp
- 1 × safety plate (usable on the right or left, removable)
- 1 × safety pin (removable)
Material & benefits
V2A stainless steel is durable, easy to maintain and suitable for standard indoor applications and normally exposed outdoor areas.
Installation notes
Preparation
We recommend the following tools and materials for installation:
- Allen key
- ISO 7380 M8 × 20 stainless steel button head screw (not included)
- METALXACT retaining compound or a suitable thread-locking adhesive
- rubber inserts matched to the glass thickness
- METALXACT stainless steel care spray
Installation
First loosen the two M6 × 16 countersunk screws connecting the two halves of the glass clamp using a suitable Allen or TX30 key. We recommend applying a small amount of thread-locking or retaining adhesive to the screw threads to achieve a permanently secure connection.
Then fasten one half of the glass clamp to the tube, post or intended mounting surface using a stainless steel button head screw; ISO 7380 M8 × 20 is recommended. Tighten the fixing screw evenly and securely with the appropriate tool.
Fit the rubber inserts suitable for the glass thickness to the inner faces of the clamp. If necessary, an Allen key may be used carefully as an installation aid. Position the glass panel and attach the second half of the clamp to the already fixed half using the two countersunk screws, tightening them evenly.
Recommendation for lasting strength and care
METALXACT retaining compound helps create a permanently secure screw connection. METALXACT stainless steel care spray is suitable for final cleaning and maintenance and gives the glass railing and stainless steel surfaces a clean, even shine.
Important safety information
The suitability of the glass clamp, fixing materials and glass panel must be professionally assessed for the respective construction. Installation must take account of the structural conditions and applicable requirements. Fixing screws, adhesive, care spray and additional installation materials are only included if expressly stated in the respective offer.
Login