Stainless steel railing post round tube Ø 42.4 mm – right end post, 8.76 mm glass and panels
| Quantity | Unit price | |
|---|---|---|
| From 1 |
€75.84*
|
|
| From 10 |
€74.66*
|
-2% |
| From 26 |
€72.69*
|
-4% |
| From 51 |
€70.73*
|
-7% |
| From 100 |
€68.76*
|
-9% |
Product information
The Stainless steel railing post – glass and panels, round tube Ø 42.4 mm, right end post, 8.76 mm is designed for glass, sheet-metal or panel infills with a 8.76 mm infill thickness. This right end post version is intended for the right-hand end of a railing section. Made from V2A stainless steel (1.4301) with a K240 brushed finish, it combines a clean appearance with holder positions suited to the installation layout.
The holder configuration suits 8.76 mm infills, including compatible laminated-glass panels.
Technical specifications
- Material: stainless steel V2A / AISI 304 / 1.4301
- Finish: K240
- Post profile: round tube Ø 42.4 mm
- Post position: right end post
- Infill thickness: 8.76 mm
- Overall height with Ø 42.4 mm round-tube handrail: approx. 1.000 mm
- Spacing between glass-holder positions: approx. 558 mm
- Lower holder position from bottom datum: approx. 200 mm
- Upper holder position to top datum: approx. 242 mm
- The pre-assembled adjustable handrail support is designed for a Ø 42.4 mm round-tube handrail.
Key benefits
- Pre-assembled adjustable handrail support
- Pre-installed threaded mounting points for glass holders
- Holder configuration for 8.76 mm infill thickness
- Surface mounting with base plate and cover rosette
- V2A stainless steel with K240 brushed finish
Typical applications
- Railings with glass infill
- Railings with sheet-metal or panel infill
- Stair and landing railings
- Interior balustrades and fall protection
- Straight railing runs and matching end sections
- right end post
Installation and delivery condition
The adjustable handrail support is already pre-assembled and allows the handrail angle to be adjusted. The pre-assembled adjustable handrail support is designed for a Ø 42.4 mm round-tube handrail. The handrail support is pre-assembled and bonded in place. If a different handrail support is required, the existing support must be removed and replaced with a suitable alternative. Further handrail supports are available in our online shop. The stated overall height of approx. 1.000 mm includes the fitted Ø 42.4 mm round-tube handrail. The overall height may differ if another handrail shape or support is used. The glass-holder locations are prepared with threaded rivet nuts. The holders can be screwed into these points; depending on the production batch, they may already be fitted.
The 8.76 mm measurement refers to the specified infill thickness, not the wall thickness of the post tube. The suitability of the complete railing, infill and fixings must be assessed for the installation site.
Login