Custom Metal Solutions Made to Measure
Do you need more than standard stock—metal parts that match your project requirements? METALXACT offers product categories for configurable sheets, plates, profiles, tubes and folded parts. For trades, metal construction, building, mechanical engineering, industry and private projects, you can find suitable materials and the size and processing options available for each product.
Start with the central overview: configure custom metal online. This commercial bridge takes you from your requirement to the right product form and then to the relevant configurator or shop product. For requirements that are not available as shop options, see metal processing and contract manufacturing information.
Custom Metal Parts for Your Project
A custom metal solution starts with the right product form and the requirements for material, dimensions, surface finish and quantity. METALXACT brings together product categories, online configuration and further information about metal processing.
Typical requirements
- Metal cutting and components to individual dimensions
- Material selection suited to the application and construction
- Profiles, tubes or sheets for assembly and further processing
- Folded sheets for covers, connections and cladding
- Surface options for visible metal parts
- Single parts, project quantities and repeat orders, depending on the product options
Custom Solutions in Sheets, Profiles and Folded Parts
The following product bridge maps typical requirements to the right product family. Follow the relevant link to check available materials, configuration options, pricing and ordering directly with the product.
| Project requirement | Relevant product category | Typical product forms |
|---|---|---|
| Flat components, covers and cladding | Custom sheets and plates | Aluminium, steel, stainless steel, brass and copper sheets |
| Frames, supports and structures | Custom metal profiles | Angle, U, T and C profiles, bars and other profiles |
| Long components and tube constructions | Tubes made to measure | Round, square and rectangular tubes |
| Cutting without an additional bend | Metal cutting to size | Cuts according to the options available for each product |
| Connection, cover and protective profiles made from sheet metal | Folded parts and sheet metal bends | Angle, U and Z folded parts and other available shapes |
| Additional processing or project-specific requirements | Metal processing and contract manufacturing information | Services and enquiry route for defined processing steps |
From Requirement to Configuration and Order
The central custom metal overview helps you choose between product forms. Next, open the relevant category and configure the specific item in the shop product. This commercial connection clarifies the next steps: define your requirement, choose the product, check the options and continue to checkout.
- Choose the product form: Decide whether you need a sheet, plate, profile, tube or folded part.
- Select the material: Open the relevant material or product category.
- Check the options: Select the available dimensions, thickness, length, surface finish and quantity shown for the item.
- Review your configuration: Check the product details, price and ordering options on the product page.
- Discuss additional processing: For requirements beyond the selectable product options, see the metal processing and contract manufacturing information.
The visual metal configurator is designed for the folded parts and sheet metal bends offered. Configure flat sheets, profiles and tubes on their respective product pages.
Materials for Custom Metal Parts
The material and product form should suit the intended application. Available materials vary by category and item; the options shown on the relevant product page are the ones to use for your order.
- Aluminium profiles for lightweight structures and versatile applications.
- Stainless steel profiles for corrosion-resistant and visible components.
- Steel profiles for structures and demanding applications.
- Brass profiles and copper profiles for technical and decorative projects.
- For sheets in different materials, start with sheets and plates.
Surface Finishes and Powder Coating
Surface options are available for many metal products, depending on the material and item. Check the selection directly in the shop product. For an overview of the service, visit powder coating for metal parts. Not every coating can be combined with every material or product.
Metal Solutions for B2B, Trades and Industry
The product categories support projects in metalworking and fabrication, mechanical and plant engineering, construction and façades, interior and furniture fit-out, as well as advertising, exhibition and shopfitting. Businesses can check product options for individual requirements, project quantities or repeat orders. Available quantities and terms are shown for each product or through its enquiry route.
For processing steps beyond the online selection, the custom metal overview provides a suitable next step.
FAQ – Custom Metal Solutions Made to Measure
What do custom metal solutions made to measure mean?
Custom metal solutions are metal products selected to suit a project and, depending on the product, configured to size. Examples include sheets, plates, profiles, tubes and folded parts.
Which metal parts can I configure to size at METALXACT?
Depending on the product category, you can select sheets and plates, metal profiles, tubes, bars, folded parts and sheet metal bends. The available shapes, dimensions and processing options are shown in the relevant category or shop product.
How do I find the right starting point for my metal project?
Start by choosing the product form: flat cuts are listed under sheets and plates or metal cutting; long components under metal profiles and tubes; and bent sheet metal under folded parts and sheet metal bends. The custom metal overview provides a central product guide.
Which materials are available for custom metal parts?
Depending on the product, the range includes aluminium, stainless steel, steel, galvanised steel, brass and copper. The relevant product page shows which materials and finishes are available for a specific component.
Can I configure dimensions, material and quantity online?
Yes. In each shop product, you can choose from the material, dimension and quantity options available for that item. Depending on the product, additional options such as surface finish or processing may also be available. The product page displays the price and ordering options.
What is the visual metal configurator designed for?
The visual METALXACT configurator is designed for the folded parts and sheet metal bends offered in the shop. It helps you select a profile shape and enter the available dimensions. For flat sheets, profiles and tubes, use the relevant product category or shop product.
Can I have metal parts powder coated?
Powder coating is available for many metal products. Check the product page and the powder coating section to see whether colours and coating options are offered for your chosen material and item.
Does METALXACT offer custom manufacturing and contract manufacturing?
Information about defined processing steps and project-specific requirements is available in the metal processing and contract manufacturing section. Requirements that cannot be selected directly in the shop product should be discussed through the enquiry route provided there.
Are METALXACT metal solutions suitable for B2B, trades and industry?
The product categories serve, among others, trade businesses, metal construction, mechanical and plant engineering, construction, interior fit-out and industry. Whether an item suits a single order, small batch or recurring requirement depends on the ordering options for that product.
Where can I see the price and delivery options for my configuration?
After selecting the available product options, you can see the price and available ordering and delivery options on the relevant shop product or during checkout.
Find the Right Product Category
Start with the product form you need, compare the available materials and configure dimensions and other options in the relevant product. For additional processing steps, continue to the metal processing and contract manufacturing information.