Buy aluminium and brass made to measure online
Aluminium and brass cover two different search and purchasing intents: lightweight, technical and corrosion-resistant on one side; decorative, easy to machine and premium in appearance on the other. At METALXACT, you can select, compare and configure suitable profiles, bars, tubes, sheets and plates made to measure for your project.
Aluminium or brass – which material suits your project?
Anyone searching for aluminium and brass usually wants more than just a material definition: Which material is lighter? Which looks more premium? Which profiles are available? Which dimensions are possible? Which surface is suitable? And how can the right component be ordered directly online?
Aluminium is a lightweight metal with good corrosion resistance and many technical profile shapes. Brass is a copper-zinc alloy with a warm, gold-like appearance and good machinability. Both materials are suitable for trades, industry, interior finishing, model making, furniture making, advertising technology and private projects – but with different strengths.
At METALXACT, you can access the right entry points directly via aluminium profiles made to measure, brass profiles made to measure, aluminium sheets, sheet brass, metal cutting and the metal configurator.
Consolidating demand: compare aluminium and brass on one page
This page brings together several search intents that often occur together in practice: aluminium or brass, difference between aluminium and brass, aluminium profiles made to measure, brass profiles made to measure, aluminium sheet, sheet brass, aluminium tube, brass tube, metal cutting and metal made to measure. This creates a central decision and purchase bridge from material comparison to the right product category.
| Search intent | What the customer actually wants to know | Best entry point |
|---|---|---|
| Aluminium or brass | Which material is technically, visually and economically better suited? | Metal profiles made to measure |
| Aluminium made to measure | Order lightweight profiles, tubes, bars or sheets in the right dimensions. | Aluminium profiles |
| Brass made to measure | Find decorative or technical brass semi-finished products for interior finishing, design and workshop use. | Brass profiles |
| Aluminium sheet or sheet brass | Compare sheet material for covers, signs, cladding or visible surfaces. | Sheets & plates |
| Cutting and configuration | Define material, dimensions, thickness, length, surface and quantity online. | Metal configurator |
Range: aluminium and brass at METALXACT
The range is structured so that you can go directly from the material to the right form. Aluminium offers a particularly wide variety of profile variants for construction, furniture making, shopfitting, mechanical engineering, solar, interior finishing and technical applications. Brass is especially strong in bars, tubes and sheets when decorative effect, good machinability and a high-quality metal appearance are required.
| Product form | Aluminium | Brass |
|---|---|---|
| Round bars | Aluminium round bars for lightweight turned parts, axles, holders and technical components | Brass round bars for turned parts, decorative parts, model making and workshop projects |
| Flat bars | Aluminium flat bars for strips, guides, holders and lightweight constructions | Brass flat bars for visible strips, fittings, covers and decorative elements |
| Square bars | Aluminium square bars for lightweight shaped parts and stable frame solutions | Brass square bars for precise shaped parts, design and craft applications |
| Hexagonal bars | Aluminium hexagonal bars for lightweight technical components and machining | Brass hexagonal bars for turned parts, connecting elements and decorative technology |
| Round tubes | Aluminium round tubes for lightweight frames, handles, spacers and constructions | Brass round tubes for decor, interior finishing, model making and visible metal solutions |
| Sheets & plates | Aluminium sheet made to measure for lightweight covers, cladding and advertising technology | Sheet brass made to measure for signs, design surfaces, covers and interior finishing |
Aluminium and brass made to measure – configure profiles, tubes, bars and sheets online at METALXACT.
Aluminium: lightweight, versatile and well suited to technical constructions
Aluminium is particularly interesting when a component needs to be lightweight, easy to assemble and corrosion-resistant at the same time. That is why aluminium is often used for frames, cladding, profiles, sheets, tubes, engineering profiles, solar profiles, furniture making, shopfitting, advertising technology and private constructions.
- Aluminium rectangular tubes for frames, substructures and racks
- Aluminium square tubes for lightweight, stable constructions
- Aluminium angle profiles for edges, connections and clean finishes
- Aluminium U-profiles for edging, guides and construction details
- Aluminium T-profiles for connections, edges and technical applications
- Aluminium solar profiles for photovoltaic and mounting applications
- Aluminium engineering profiles for modular constructions and technical frames
For visible applications, the surface plays a central role. Depending on the product area, bright, anodised or powder-coated aluminium variants may be suitable. For coloured or corrosion-protected components, powder coating is an important commercial bridge.
Brass and aluminium made to measure – configure profiles, tubes, bars and sheets online at METALXACT.
Brass: decorative, easy to machine and premium in appearance
Brass is a copper-zinc alloy and is especially valued when a component should not only function, but also look visibly high-quality. The warm, gold-like metal appearance makes brass popular for signs, fittings, strips, covers, model making, interior finishing, furniture making, design objects and craft-made individual pieces.
- Brass round bars for turned parts, decorative elements and small technical parts
- Brass flat bars for visible strips, covers and decorative constructions
- Brass square bars for dimensionally stable components and design projects
- Brass hexagonal bars for machining and technical individual parts
- Brass round tubes for visible tube solutions, decor and model making
- Sheet brass made to measure for signs, plates, covers and interior design
Compared with aluminium, brass often focuses more strongly on appearance. At the same time, brass is a technical material that can be machined well depending on alloy and dimension. Anyone who also wants to compare other copper alloys will also find copper profiles, bronze profiles and gunmetal profiles at METALXACT.
Selecting the right material, dimensions and surface
The right decision is created by combining material, shape, dimension, surface and application. An aluminium tube for a lightweight construction is selected differently from a sheet brass panel for a visible sign or a brass bar for a turned component. Length, width, diameter, wall thickness, material thickness, surface, quantity and further processing are important.
| Criterion | Aluminium | Brass |
|---|---|---|
| Weight | Very good when lightweight components are required | Heavier and more premium in feel |
| Appearance | Technical, bright, modern; depending on the surface, bright, anodised or coated | Warm, gold-like, decorative and premium |
| Surface | Bright, anodised or powder-coated depending on the product | Natural brass appearance, especially for visible interior applications |
| Dimensions | Large selection of profile shapes, tube shapes, bars and sheets | Bars, tubes and sheets for decorative and technical applications |
| Processing | Good for cutting, drilling, assembly and lightweight constructions | Good for machining, turned parts, milled parts and design components |
| Outdoor use | Often suitable, especially with the right surface and construction | Should be checked on a project-specific basis, especially with visible surfaces and weather exposure |
Processing: cutting, drilling, deburring and surface planning
Processing is a central reason to buy aluminium and brass. Many projects do not require raw material in standard length, but a component already matched to length, width, thickness or diameter. This reduces effort in the workshop, assembly, furniture making, mechanical engineering or interior finishing.
- Cutting: plan suitable length, width or sheet size depending on product and configuration.
- Drilling: plan early for components with fixing points, mounting plates or visible connections.
- Deburring: important for assembly-friendly edges, safety and clean handling.
- Folding and edging: relevant for sheet solutions, covers, L-profiles, U-profiles and connection details.
- Surface: select especially carefully for visible aluminium and brass components.
- Powder coating: an important option for colour, design and surface protection for many aluminium and metal products.
For sheet solutions, it is also worth taking a direct look at folded parts and sheet metal bends made to measure if a plate is to become an L-profile, U-profile, Z-profile, angle plate or technical cover.
Application matrix: selecting aluminium and brass by application
| Project / application | Often suitable direction | What to pay attention to? | Direct entry |
|---|---|---|---|
| Lightweight frames and racks | Aluminium rectangular tubes, square tubes, angle profiles | Weight, stability, wall thickness, connection, surface | Aluminium rectangular tubes |
| Signs and decorative plates | Sheet brass or aluminium sheet | Appearance, surface, scratch sensitivity, fastening | Sheet brass |
| Furniture making and interior finishing | Aluminium profiles, brass profiles, sheets and plates | Visible surface, edges, assembly, design effect | Metal profiles |
| Model making and workshop | Round bars, flat bars, square bars, tubes | Dimension, machinability, length, quantity | Metal cutting |
| Advertising technology and shopfitting | Aluminium sheet, aluminium composite panel, sheet brass | Flatness, colour, visible surface, surface, fastening | Aluminium composite panel |
| Technical constructions | Aluminium profiles and tubes | Profile shape, wall thickness, load, connection, assembly | Engineering profiles |
| Decorative metal look | Brass bars, brass tubes, sheet brass | Surface, fingerprints, cleaning, indoor or outdoor use | Brass profiles |
Select aluminium and brass in the configurator
Once material, dimensions and profile shape have been defined, the METALXACT metal configurator guides you step by step to the right selection. Especially with mixed projects made from aluminium and brass, it makes sense to plan each component individually according to its function: load-bearing, decorative, visible, lightweight, machinable or critical for assembly.
- Select material: choose aluminium for lightweight technical components or brass for decorative and easy-to-machine components.
- Determine product form: select bar, tube, sheet, plate or profile shape to match the application.
- Enter dimensions: define length, width, diameter, wall thickness, material thickness or leg length depending on the product.
- Check surface: consider bright, anodised, natural metal appearance or powder-coated finish.
- Plan processing: check cutting, drilling, deburring, folding or further processing depending on product options.
- Define quantity: configure individual item, project quantity or B2B requirement directly as needed.
- Check order: carefully compare material, dimensions, surface, tolerances and application.
For load-bearing, safety-relevant or particularly precisely fitting applications, the configurator does not replace technical design. Dimensions, tolerances, fastening and subsequent load should be checked before ordering.
Delivery, B2B requirements and project planning
For trades, industry, workshops and private projects, it is not only the material that counts, but also predictable processing. Anyone ordering aluminium and brass made to measure can better adapt cuts and profile shapes to assembly, production, design or series requirements. This reduces offcuts, saves reworking and makes it easier to source several metal parts from one source.
For commercial customers, it is especially important that dimensions, quantities and recurring requirements are clearly defined. With the B2B access, project customers can plan their orders in a structured way. For combined projects, it is also worth linking metal made to measure, metal cutting, metal profiles, sheets & plates and folded parts.
Commercial bridge: from material comparison to the right product
Aluminium and brass should not be considered in isolation. In many projects, both materials are compared with stainless steel, steel, copper, bronze, gunmetal, plastic, sheets, profiles or folded parts. The right entry point depends on whether you want to reduce weight, enhance appearance, clad a surface, use a tube, machine a bar or order a complete component made to measure.
At METALXACT, you can connect the commercial paths directly: aluminium profiles, brass profiles, aluminium sheets, sheet brass, copper profiles, bronze profiles, stainless steel profiles, steel profiles, metal cutting and configurator.
Product bridge: select suitable aluminium and brass products directly
| Product area | Typical use | Direct entry |
|---|---|---|
| Aluminium profiles made to measure | Frames, constructions, furniture making, shopfitting, technical profiles | View aluminium profiles |
| Brass profiles made to measure | Design, interior finishing, fittings, model making, visible metal parts | View brass profiles |
| Aluminium round bars | Lightweight turned parts, axles, holders, technical components | View round bars |
| Brass round bars | Turned parts, decorative pieces, model making, craft applications | View round bars |
| Aluminium flat bars | Strips, supports, lightweight holders, construction details | View flat bars |
| Brass flat bars | Decorative strips, covers, visible edges, fittings | View flat bars |
| Aluminium round tubes | Handles, spacers, lightweight racks, constructions | View round tubes |
| Brass round tubes | Decorative tubes, visible constructions, model making | View round tubes |
| Aluminium sheet | Lightweight plates, covers, cladding, advertising technology | View aluminium sheet |
| Sheet brass | Signs, covers, design surfaces, decorative interior applications | View sheet brass |
| Powder coating | Colour, design and surface protection for suitable metal products | Check powder coating |
| Metal cutting | Cut materials, profiles, tubes, bars and sheets according to project requirements | Plan cutting |
Frequently asked questions about aluminium and brass
What is the most important difference between aluminium and brass?
Aluminium is a lightweight, corrosion-resistant light metal. Brass is a copper-zinc alloy with a warm, gold-like appearance, good machinability and strong decorative effect. The choice depends on weight, appearance, processing, surface and application.
When should I choose aluminium?
Aluminium is often useful when low weight, corrosion resistance, simple assembly, technical profiles, frames, sheets, tubes or visible constructions are important. Typical applications include furniture making, shopfitting, advertising technology, vehicle construction, engineering profiles, solar profiles and lightweight substructures.
When is brass better suited?
Brass is often the right choice for decorative components, fittings, signs, covers, turned parts, model making, interior finishing and projects where a warm metal look or good machinability is important.
Which aluminium products are available at METALXACT?
At METALXACT you will find, among other things, aluminium round bars, flat bars, square bars, hexagonal bars, round tubes, square tubes, rectangular tubes, angle profiles, U-profiles, T-profiles, C-profiles, H-profiles, Z-profiles, solar profiles, engineering profiles as well as aluminium sheets and plates.
Which brass products are available at METALXACT?
At METALXACT you will find brass round bars, flat bars, square bars, hexagonal bars, round tubes as well as sheet brass and plates for technical, craft and decorative projects.
Can I order aluminium and brass made to measure?
Yes. Depending on the product, aluminium and brass can be selected online in suitable dimensions, profile shapes, lengths, thicknesses and quantities and ordered for individual projects.
Which surfaces are important for aluminium and brass?
For aluminium, bright, anodised or powder-coated surfaces are typical selection criteria. With brass, the natural decorative metal look is often the focus. The specific surface depends on the product and application.
Is powder coating possible for aluminium and brass?
Aluminium products can often be planned with powder coating depending on the product area. For brass and other non-ferrous metals, coating is not provided in every product area and should be checked before selection.
Which information is important for configuration?
Important details include material, profile shape, dimension, length, thickness, surface, quantity, desired processing, application and the question of whether the component will be used visibly, decoratively, load-bearing, sliding, exposed to weather or critical for assembly.
Does the online configurator replace technical design?
No. The online configurator supports selection and ordering, but does not replace technical design or construction approval for load-bearing, safety-relevant or particularly precisely fitting applications.
Conclusion: order aluminium and brass made to measure in a targeted way
Aluminium and brass are not direct substitute materials, but two different solutions for different requirements. Aluminium is particularly convincing thanks to low weight, technical versatility, profile variety and modern surfaces. Brass stands out with decorative effect, warm metal appearance and good machinability for visible or detailed components.
Anyone who bundles demand correctly does not end up with an abstract material decision, but with the right product: aluminium profile, brass profile, round bar, flat bar, tube, sheet, plate, cutting or configurator. METALXACT maps exactly this bridge – from material comparison to the specific custom order.