Aluminium flat bar 10 x 2 mm
Daily shipping
Secure shopping
Quality guarantee
Aluminium (Material)
Product information
The aluminium flat bar made of EN AW-6060 (AlMgSi0.5) is supplied in a press blank / raw condition. The profile is extruded and delivered in temper T66.
Technical features:
- Material: AlMgSi0.5
- Alloy designation: EN AW-6060
- Surface: press blank / raw
- Temper: T66
- Manufacturing process: extruded
- Standards: EN 573-3, EN 755-1 / -2 / -5
Material properties:
- low weight
- good corrosion resistance
- very good anodising properties
- suitable for powder coating
- good machinability
- weldable and solderable
- non-magnetic
- suitable for food-contact applications according to EN 602
Notice: The sawn edges are not deburred. Due to the raw aluminium surface, minor scratches or surface marks may occur. These are standard for this product type and do not constitute a defect.
Surface appearance and colour may vary depending on the production batch.
| longueurs tolerance: | +-5 mm (precise possible -> please inquire) |
|---|---|
| manufacturing process: | pressed |
| Others: | The sawn edges are unfinished and not deburred. |
| material: | AlMgSi0,5 |
| material number: | EN AW-6060 = 3.3206 |
| molds: | Flat bar |
| delivery condition: | T66 |
| surface: | mill finish (raw/unfinished), unprocessed, raw, scratches, storage marks, etc. normal |
| Standard norm: | Chemical composition according to EN 573-3, General requirements according to EN 755-1, Propriétés mécaniques selon EN 755-2, Tolérances dimensionnelles et géométriques selon EN 755-5 |
Login
No reviews found. Share your insights with others.