At METALXACT, you will find stainless steel sheet made from 1.4301 (X5CrNi18-10, V2A) in three versions: unground, with a ground and brushed K240 finish, and as perforated sheet. First, choose according to the desired surface finish and function. You can then check the dimensions, material thickness and available options directly on the relevant product page.
Material 1.4301 is also known as V2A and X5CrNi18-10. The specific surface finish and version differ by product. Therefore, check the product description and technical information before ordering.
A suitable choice for technical components, covers or cladding when a brushed visible surface is not required. The listed product is made from 1.4301 and is offered unground. You can find the dimensions and available options in the product details.
Configure unground V2A sheet ›K240 refers to the surface finish, not a separate material grade. The listed stainless steel sheet has one side ground or brushed with a 240-grit finish and is covered with protective film. When planning, consider the direction of the grain and the product-specific information.
View the K240 finish ›Choose perforated sheet when the hole pattern is part of the design or function. Compare the available hole patterns, including QG and RV, as well as the hole size, material thickness and dimensions. The relevant product page shows which versions are available to select.
Select perforated stainless steel sheet ›Before ordering, check the material, material thickness, dimensions and product-specific information. The current range includes stainless steel sheets made from 1.4301 (V2A). If your application requires a different material grade, compare this requirement with the technical information for the product you intend to order.
No. K240 refers to the ground or brushed surface finish. The material grade is listed separately in the product details. The listed stainless steel sheet has a K240 finish on one side.
Here, V2A refers to material 1.4301 (X5CrNi18-10). “Perforated sheet” describes a version with a defined hole pattern. The stainless steel perforated sheet on offer is also made from 1.4301. For the product you choose, also check the hole shape, hole size and material thickness.
Available material thicknesses and dimensions depend on the product. Select the values you need directly on the product page and check the product’s technical limits there.
The current products listed on this page are stainless steel sheets made from 1.4301 (V2A). If you need V4A, please check the available products and technical information before ordering. Find out more about the difference in the article V2A and V4A .
