Aluminium Square Bar 50 x 50 mm
Daily shipping
Secure shopping
Quality guarantee
Aluminium (Material)
Product information
The aluminum square bar is manufactured from EN AW-2007 (AlCuMgPb), depending on the version, and supplied in a raw / untreated condition.
Technical characteristics:
- Alloy: AlCu4PbMgMn (AlCuMgPb), 3.1645
- Material designation: EN AW-2007
- Surface: raw / untreated
- Manufacturing process: extruded
- Standards: EN 573-3, EN 755-1 / -2 / -4
- Delivery condition: T4 according to EN 515
Material properties:
- very good machinability (e.g. turning, milling, drilling)
- not suitable for welding
- not suitable for anodizing
- not suitable for powder coating
Note: The sawn edges are untreated and not deburred. Due to the raw/untreated surface, scratches or surface marks may occur. These are customary in trade and do not constitute a defect.
Variations in surface appearance or color compared to the product images may occur due to batch variations and depending on monitor and graphics settings.
| longueurs tolerance: | +-5 mm (precise possible -> please inquire) |
|---|---|
| manufacturing process: | drawn: 10x10 mm bis 15x15 mm, pressed |
| Others: | Note: Due to production processes, a chamfer of up to approx. 5 mm may occur at one end of the bar., The sawn edges are unfinished and not deburred. |
| material: | AlMgSi0,5, EN AW-2007, AlCu4PbMgMn (AlCuMgPb) |
| material number: | EN AW-2007 = 3.1645, EN AW-6060 = 3.3206 |
| molds: | square bar |
| delivery condition: | T3 = 10x10 mm to 15x15 mm, otherwise T4 according to EN 515 = remainder |
| surface: | mill finish (raw/unfinished), unprocessed, raw, scratches, storage marks, etc. normal |
| Standard norm: | Chemical composition according to EN 573-3, General requirements according to EN 755-1, Propriétés mécaniques selon EN 755-2, Tolérances dimensionnelles et géométriques selon EN 755-4 |
Login
No reviews found. Share your insights with others.