Aluminium (Material)
Product information
The aluminium round tube made of EN AW-6060 (AlMgSi0.5) is supplied in a press blank / raw condition. The tube is extruded and delivered in temper T66 (solution heat-treated and artificially aged).
Technical features:
- Material: AlMgSi0.5
- Alloy designation: EN AW-6060
- Surface: press blank / raw
- Temper: T66
- Manufacturing process: extruded
- Standards: EN 573-3, EN 755-1 / -2 / -8
Tolerances according to EN 755-8 (guideline values):
- Outside diameter tolerance: approx. ±0.40 mm
- Inside diameter tolerance: approx. ±0.30 mm
The stated tolerances apply to typical tube diameters from approx. 10 mm to 300 mm. The tables of EN 755-8 are decisive.
Material properties:
- low density
- very good corrosion resistance
- tight dimensional tolerances
- good machinability
- non-magnetic
- very suitable for decorative anodising
- suitable for powder coating
- weldable and solderable
- suitable for food-contact applications according to EN 602
Notice: The sawn edges are not deburred. Due to the raw aluminium surface, scratches or surface marks may occur. These are standard and do not constitute a defect.
Surface appearance and colour may vary depending on production batch and display settings.
| Material: | Aluminium |
|---|---|
| Shape: | Round tube |
| Alloy: | EN AW-6060 (AlMgSi0,5) |
| Manufacturing process: | extruded |
| Standard: | EN 573-3, EN 755-1, EN 755-2, EN 755-8 |
| Powder coating available: | Yes |
| Magnetic: | non-magnetic |
| Corrosion resistance: | increased |
| Weldability: | readily weldable |
| Property: | anodisable, corrosion-resistant, lightweight |
| Area of use: | damp areas, indoor, outdoor |
Login