Powder coated aluminium C profile 11 x 17 x 4,5 x 2 mm (M8 Schraube)
Product information
The aluminium C-profile made of EN AW-6060 (AlMgSi0,5) is supplied with a powder-coated surface.
Technical characteristics:
- Material: AlMgSi0,5
- Material number: EN AW-6060
- Surface: anodised and powder-coated
- Coating thickness: approx. 60–80 µm
- Delivery condition: T66 (solution heat-treated + artificially aged)
- Manufacturing process: extruded
- Standards: EN 573-3, EN 755-1 / -2 / -9
Surface characteristics:
- uniform coating with closed surface structure
- Gloss level glossy: approx. 80–95 GE
- Gloss level matt: approx. 20–30 GE
- coating of the outer surfaces as well as accessible inner contours of the profile
Material properties:
- low material density
- very good corrosion resistance
- homogeneous surface structure
- precise profile shape due to extrusion process
- good machinability
- non-magnetisable
- suitable for welding and soldering
- food-safe according to EN 602
Note: The C-profiles are suspended via the open ends using hooks. This results in small uncoated contact points at the ends. If required, these can be concealed with a touch-up paint pen (optionally available from us). These contact points are process-related and do not constitute a defect.
Thermal influence during the coating process may cause deviations from straightness. The usability of the profile remains unaffected.
The powder coating is applied circumferentially to the outer surfaces. This slightly increases the external dimensions of the square tube. The coating thickness is approximately 0.06–0.08 mm per side, increasing width and height accordingly. With additional primer, the total coating build-up may increase.
The sawn end faces are not coated, untreated and not deburred.
Slight differences in colour tone or surface appearance may occur due to batch variations and may visually differ depending on the display device.
Login