Powder coated aluminium square tubes 70 x 70 x 2 mm
Aluminium (Material)
Product information
The aluminium square tube made of EN AW-6060 (AlMgSi0,5) is supplied with a powder-coated surface.
Technical characteristics:
- Material: AlMgSi0,5
- Material number: EN AW-6060
- Surface: powder-coated
- Coating thickness: approx. 60–80 µm
- Delivery condition: T66 (solution heat-treated + artificially aged)
- Manufacturing process: extruded
- Standards: EN 573-3, EN 755-1 / -2 / -8
Surface characteristics:
- uniformly applied, durable coating
- Gloss level glossy: approx. 80–95 GE
- Gloss level matt: approx. 20–30 GE
- coated outer surfaces including edges and corners
Material properties:
- low dead weight
- high corrosion resistance
- uniform surface structure
- high dimensional accuracy of the extruded profile
- good machinability
- non-magnetisable
- suitable for welding and soldering
- food-safe according to EN 602
Note: Square tubes are suspended via the open ends using U-hooks. This results in small uncoated contact points at the tube ends. If required, these can be concealed with a touch-up paint pen (optionally available from us). These contact points are process-related and do not constitute a defect.
In the case of slender or large-format square tubes, slight deviations from straightness may occur due to thermal influence during coating. The usability of the profile remains unaffected.
The powder coating is applied circumferentially to the outer surfaces. This slightly increases the external dimensions of the square tube. The coating thickness is approximately 0.06–0.08 mm per side, increasing width and height accordingly. With additional primer, the total coating build-up may increase.
The sawn end faces are not coated, untreated and not deburred.
Slight differences in colour tone or surface appearance may occur due to batch variations and may visually differ depending on the display device.
Login
1 review
23 July 2026 14:58
Sehr schöne Beschichtung und passgenaues Rohr
Das pulverbeschichtete Aluminium Vierkantrohr sieht wirklich hochwertig aus. Die Beschichtung ist gleichmäßig, der Zuschnitt passt und das Rohr wirkt stabil. Gerade für sichtbare Bereiche ist das deutlich besser, als später selbst zu lackieren. Lieferung, Verpackung und Verarbeitung waren rundum sauber.