Silver anodized aluminium flat bars 20 x 2 mm
Aluminium (Material)
Product information
The aluminium flat bar made of EN AW-6060 (AlMgSi0.5) is supplied with a silver anodised E6/EV1 surface finish. The profile is extruded and delivered in temper T66.
Technical features:
- Material: AlMgSi0.5
- Alloy designation: EN AW-6060
- Surface: silver anodised E6/EV1
- Coating thickness: approx. 10–15 µm
- Temper: T66
- Manufacturing process: extruded
- Standards: EN 573-3, EN 755-1 / -2 / -5
E6 refers to chemical pre-treatment followed by anodising and sealing, resulting in a matte surface. EV1 is a standard anodising process producing a natural silver finish.
Material properties:
- low density
- very good corrosion resistance
- smooth and uniform surface
- tight dimensional tolerances
- good machinability
- non-magnetic
- weldable and solderable
- suitable for food-contact applications according to EN 602
Notice: During the anodising process, suspension marks (contact points) may occur. These are process-related, do not affect quality or functionality and do not constitute a defect.
Scratches or surface marks from the raw material may remain visible after anodising.
The sawn edges are not anodised, not deburred and left untreated.
Surface appearance and colour may vary depending on production batch and display settings.
| longueurs tolerance: | +-5 mm (precise possible -> please inquire) |
|---|---|
| manufacturing process: | pressed |
| Others: | The sawn edges are unfinished and not deburred. |
| material: | AlMgSi0,5 |
| material number: | EN AW-6060 = 3.3206 |
| molds: | Flat bar |
| delivery condition: | T66 |
| surface: | silber eloxiert EV1/EV6 |
| Standard norm: | Chemical composition according to EN 573-3, General requirements according to EN 755-1, Propriétés mécaniques selon EN 755-2, Tolérances dimensionnelles et géométriques selon EN 755-5 |
Login