Sharp-edged steel angle raw / black (formed from hot-rolled steel sheet) 10 x 10 x 2 mm
Stahl (Material)
Product information
Hot-rolled rounded-edge steel angles – S235JR (1.0038) according to EN 10056 / EN 10025
This rounded-edge steel angle is hot-rolled from structural steel S235JR (1.0038) and complies with the requirements of EN 10056 as well as the material standard EN 10025. It consists of equal-leg angle sections in hot-rolled execution with typically rounded inner and outer edges. The manufacturing process ensures a homogeneous material structure and material-typical mechanical properties.
Main features
- Material: S235JR (1.0038) according to EN 10025
- Profile standard: EN 10056
- Manufacturing: hot-rolled non-alloy structural steel
- Profile shape: steel angle, rounded edges
- Surface: raw / mill finish (hot-rolled, with mill scale - commonly referred to as "black")
Note: Hot-rolled angle sections show typical production-related surface characteristics such as mill scale, residual scale, slight scratches or discoloration. These are due to the manufacturing process and do not constitute a quality defect provided the requirements of the applicable standards are met. Saw-cut edges are unfinished and not deburred. Dimensional deviations within the normative tolerances are possible due to manufacturing.
Material properties:
- good weldability
- material-typical strength properties
- high dimensional stability due to the hot-rolling process
- suitable for load-bearing and non-load-bearing structures
Technical specifications
- Material: S235JR (1.0038)
- Standard: EN 10056 / EN 10025
- Manufacturing process: hot-rolled
- Surface: raw / mill finish
- Leg lengths: according to standard dimensions
- Lengths: standard lengths or custom cut
Dimensional, shape and weight tolerances are governed by EN 10056. The mill-finish delivery condition does not provide permanent corrosion protection. For outdoor applications or increased corrosion exposure, a suitable surface treatment must be provided.
Applications
- Steel and metal constructions
- Frame and load-bearing structures
- Mechanical and plant engineering
- general structural applications
Delivery is as a hot-rolled angle section in accordance with EN 10056. Manufacturing-related deviations within the permissible standard tolerances are possible.
| Material: | Steel |
|---|---|
| Shape: | Angle profile |
| Alloy: | S235JR (1.0038) |
| Surface: | mill scale, unpolished |
| Manufacturing process: | hot-rolled |
| Standard: | EN 10025-2, EN 10056 |
| Powder coating available: | Yes |
| Magnetic: | magnetic |
| Corrosion resistance: | standard |
| Weldability: | readily weldable |
| Property: | high strength |
| Area of use: | indoor |
Login
1 review
11 September 2026 17:51
Stabiler Winkel mit sauberer Ausführung
Der Stahl Winkel scharfkantig wurde für eine Konstruktion in der Werkstatt benötigt. Das Profil ist stabil, die Kanten entsprechen der Beschreibung und die Abmessungen waren für meinen Einsatz geeignet. Bestellung und Lieferung liefen unkompliziert, deshalb würde ich bei passendem Bedarf wieder bestellen.