Galvanized steel rectangular tubes 120 x 50 x 3 mm
Product information
Galvanized steel rectangular tubes – S235JRH (1.0039) to EN 10219-1/2 / DIN EN 1461
These galvanized steel rectangular tubes are welded hollow sections made of structural steel S235JRH (1.0039), manufactured according to EN 10219-1/2 in compliance with EN 10025 requirements. After production, the profiles are hot-dip galvanized in accordance with DIN EN 1461 with a zinc coating. The galvanization provides corrosion protection and forms a metallic protective layer whose appearance may vary due to the manufacturing process.
Main Features
- Material: S235JRH (1.0039) to EN 10219-1/2, acc. EN 10025
- Manufacturing: Welded hollow section, cold- or hot-formed
- Corrosion protection: Hot-dip galvanized to DIN EN 1461
- Profile shape: Rectangular hollow section
- Delivery condition: Hot-dip galvanized
Note: Due to the manufacturing process, all rectangular tubes have a visible longitudinal weld seam. Depending on the profile dimensions, the weld seam may run along the wide or narrow side and does not constitute a quality defect. During hot-dip galvanizing, zinc-typical surface features such as zinc runs, drips, ash residues or varying surface textures may occur. These are process-related and do not constitute grounds for complaint provided DIN EN 1461 requirements are met. Saw-cut edges are production-related and not machined or deburred; cut surfaces may be uncoated after cutting and must be protected against corrosion if required. A suitable zinc spray for re-galvanizing is available from us: Zinc spray 400 ml – Repair and corrosion protection spray.
Material Properties:
- typical strength properties of structural steel S235JRH
- good weldability prior to galvanizing
- durable corrosion protection through metallic zinc coating
- uniform wall thickness distribution
Technical Specifications
- Standard: EN 10219-1/2
- Tolerances: according to EN 10219-2
- Material: S235JRH (1.0039)
- Galvanizing: Hot-dip galvanized to DIN EN 1461
- Surface: Batch hot-dip galvanized
- Lengths: Standard lengths or custom cut
- Wall thicknesses: depending on selected dimension
Dimensional, shape and weight tolerances comply with EN 10219-2. The galvanizing process may cause slight dimensional deviations within permissible tolerances. The surface corresponds to the typical appearance of batch hot-dip galvanizing and is not intended for decorative visible applications without additional finishing.
Applications
- Steel and metal constructions for indoor and outdoor use
- Load-bearing and non-load-bearing structures
- Frame and substructures
- Technical applications with increased corrosion protection requirements
Delivery is made as a hot-dip galvanized welded hollow section in accordance with applicable product and coating standards. Production-related geometric deviations within permissible tolerances are possible.
Login
1 review
23 July 2026 14:56
Sehr stabiles verzinktes Rechteckrohr
Das verzinkte Stahl Rechteckrohr wurde sauber zugeschnitten und kam gut geschützt bei mir an. Die Verzinkung wirkt gleichmäßig und robust, gerade für Arbeiten im Außenbereich ist das wichtig. Die Maße haben direkt gepasst, nichts war verzogen oder unsauber. Für Stahlbau, Rahmen oder stabile Konstruktionen würde ich es wieder bestellen.