Steel rectangular tubes 80 x 60 x 6 mm
Product information
Steel rectangular tubes – S235JRH (1.0039) to EN 10219-1/2
These steel rectangular tubes are welded hollow sections made of structural steel S235JRH (1.0039), manufactured in accordance with EN 10219-1/2 and taking into account the requirements of EN 10025. Production is carried out using cold- or hot-formed processes. The sections feature uniform wall thickness distribution and material-typical mechanical properties and comply with the normative requirements for welded structural hollow sections.
Main Features
- Material: S235JRH (1.0039) to EN 10219-1/2, acc. to EN 10025
- Manufacturing: Welded hollow section, cold- or hot-formed
- Profile shape: Rectangular hollow section
- Weldability: Suitable for common welding processes
- Delivery condition: Raw (black) or galvanized, depending on selection
Note: Due to the manufacturing process, all rectangular tubes have a visible longitudinal weld seam. Depending on the profile dimensions, the weld seam may run on the wide or narrow side of the section and does not constitute a quality defect. Saw-cut edges are production-related and are not machined or deburred. Material- and process-related surface characteristics such as roll marks, minor scratches, or transport marks may occur and, within the applicable standard requirements, are not considered grounds for complaint.
Material properties:
- uniform wall thickness distribution
- good weldability
- material-typical strength properties
- suitable for load-bearing and non-load-bearing structures
Technical Specifications
- Standard: EN 10219-1/2
- Tolerances: according to EN 10219-2
- Material: S235JRH (1.0039)
- Surface: Raw (black) or galvanized
- Lengths: Standard lengths or custom cutting
- Wall thicknesses: depending on the selected dimension
Dimensional, shape, and weight tolerances are governed by EN 10219-2. The surface condition corresponds to the respective delivery condition. The sections are not intended for decorative visible applications without additional mechanical finishing or surface treatment.
Applications
- Steel and metal constructions
- Mechanical and plant engineering
- Frame and load-bearing structures
- Technical substructures
Delivery is as a welded hollow section in accordance with the applicable product standard. Manufacturing-related geometric deviations within the permissible standard tolerances are possible.
Login